Mold is the main tool of die casting. Therefore, when designing the mold, it should pay attention to make the overall structure of the mold and the structure of the mold part reasonable, easy to manufacture, easy to use, safe and reliable. In order to prevent the mold from being deformed in the die casting, the molten metal flows stably in the mold, and the casting can be uniformly cooled, and can be fully ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ 25 kg appoption apps ᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱱᱚᱶᱟ ᱢᱮᱴᱨᱤᱠᱥ ᱨᱮ ᱵᱟᱝ ᱧᱮᱞᱚᱜ-ᱟ ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱯᱩᱨᱟᱹ ᱯᱩᱨᱟᱹ ᱞᱮᱠᱟ ᱛᱮ ᱵᱟᱝ ᱦᱩᱭᱩᱜ-ᱟ ᱾
{0} ᱫᱚ ᱢᱮᱴᱨᱤᱠᱥ ᱟᱨ ᱵᱷᱮᱞᱭᱩ ᱨᱮᱭᱟᱜ ᱢᱮᱱᱮᱛ ᱫᱚ ᱥᱴᱨᱤᱝ ᱨᱮᱭᱟᱜ ᱜᱚᱲᱦᱚᱱ ᱠᱟᱱᱟ ᱾
ᱱᱚᱶᱟ ᱫᱚ ᱟᱹᱰᱤ ᱡᱟᱹᱨᱩᱲ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱜᱮᱭᱟ᱾ ᱢᱮᱴᱨᱤᱠᱥ ᱞᱟᱹᱜᱤᱫ, ᱢᱮᱴᱨᱤᱠᱥ ᱫᱚ } } } } ᱥᱴᱨᱤᱝ ᱦᱟᱴᱤᱱᱜ ᱦᱟᱴᱤᱱᱜ ᱞᱟᱹᱜᱤᱫ ᱾
{} } } ᱨᱩᱠᱷᱤᱭᱟᱹ ᱰᱟᱭᱜᱽᱱᱚᱥᱴᱤᱠ ᱠᱟᱨᱚᱱ
ᱫᱤᱥᱟᱹ ᱫᱚᱦᱚᱭ ᱢᱟ ᱡᱮ, ᱟᱹᱰᱤ ᱠᱚᱢ, ᱟᱨ ᱟᱹᱰᱤ ᱜᱟᱱ ᱢᱮᱴᱨᱤᱠ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱡᱟᱹᱨᱩᱲ ᱜᱮᱭᱟ, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱡᱟᱹᱨᱩᱲ ᱜᱮᱭᱟ, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱡᱟᱹᱨᱩᱲ ᱜᱮᱭᱟ᱾ 5′′- ᱟᱨ ᱱᱚᱶᱟ ᱫᱚ ᱟᱹᱰᱤ ᱢᱟᱨᱟᱝ ᱵᱷᱮᱜᱟᱨ ᱠᱟᱱᱟ, ᱡᱩᱫᱤ ᱦᱚᱸ 3′′/min gạhir kạmi lạgit̕ kạmi lạgit̕ kạmi lạgit̕ kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmi kạmạkạkạmạạtᱮᱰ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ.
{} } } ᱥᱤᱥᱴᱚᱢ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱰᱤᱡᱟᱭᱤᱱ
The pouring system is not only a channel for liquid metal filling and die casting, but also regulates the flow velocity and pressure of the melt, as well as the exhaust conditions and the heat stability of the die casting. Therefore, the design of the casting system must analyze the structural characteristics of the casting. Technical requirements, alloy types and characteristics, but also consider the type and characteristics of the die casting machine, in order to design a reasonable casting }}}} ᱮᱯᱞᱤᱠᱮᱥᱚᱱ
{} }} ᱰᱤᱡᱟᱭᱤᱱ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱥᱚᱨᱥ ᱾
The mold should be provided with overflow tanks and exhaust passages with a sufficient overflow range, which is important for ensuring product quality. It is often overlooked that the overflow channel is blocked prematurely by incoming metal liquid. A reasonable structure is required to allow the molten metal to flow into the deeper part of the overflow tank to ensure that the venting hole is always open for the longest time. In addition, the ᱪᱤᱛᱟᱹᱨ 3. imphirt ᱫᱚ extion key ᱠᱷᱚᱱ } } × ᱚᱱᱟ ᱫᱚ ᱥᱟᱹᱨᱤ ᱜᱮ ᱢᱤᱫ ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱨᱤᱢᱚᱴ ᱠᱷᱚᱱ ᱚᱪᱚᱜ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ᱾
