ᱢᱟᱭᱠᱨᱚᱣᱮᱵᱷ/ᱪᱟᱸᱫᱚ ᱓᱘ ᱠᱤᱢᱤᱢ ᱨᱮ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮ ᱜᱞᱩᱠᱚᱡᱽ ᱨᱮᱭᱟᱜ ᱠᱚᱱᱟ ᱨᱮ ᱫᱚᱦᱚ ᱠᱟᱛᱮ ᱾
ᱱᱚᱶᱟ ᱢᱟᱥᱤᱱ ᱫᱚ 5G ᱠᱷᱚᱱ ᱦᱚᱸ ᱵᱟᱹᱲᱛᱤ ᱢᱮᱱᱟᱜ-ᱟ ᱡᱟᱦᱟᱸ ᱨᱮ ᱢᱟᱥᱤᱱ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱵᱟᱹᱲᱛᱤ ᱵᱮᱵᱚᱦᱟᱨᱚᱜ-ᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱟᱭᱢᱟ ᱞᱮᱠᱟᱱ ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱠᱚ ᱢᱮᱱᱟᱜ-ᱟ᱾
This machine is controlled by computer program. The hydraulic drive adopts imported proportional control valve, designed to be crank expanding structure and 4-rod pilot elastic stress framework. Locking is tensile, faster and reliable. Hydraulic ejector is used for casting pieces. Two-phase injection is afforded up to more than 4m/s, and minimum boosting less than 1925. vs virgine 8 exts ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱨᱤᱢᱚᱴ ᱠᱚᱱᱴᱨᱚᱞ ᱨᱮᱭᱟᱜ ᱵᱮᱴᱟᱨᱤ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱵᱟᱝ ᱵᱮᱥ ᱜᱮᱭᱟ᱾
ᱢᱟᱭᱠᱨᱚᱥᱚᱯᱷᱴ ᱟᱨ/ᱵᱟᱝᱠᱷᱟᱱ ᱓ᱰᱤᱵᱤ/ᱡᱤᱵᱤᱴᱤ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱠᱚ ᱾

ᱠᱞᱟᱵᱽ ᱨᱮ
The clamping unit is used to provide clamping force to hold die casting machine or mould during injection process. The acceleration of force is usually driven by a hydraulic cylinder or servomotor through a toggle mechanism which acts as a magnifying device. The toggle purchase device has large force amplification factor. So only small driving oil cylinder and very simple hydraulic control, then achieveᱟᱹᱰᱤ ᱠᱮᱴᱮᱡ, ᱯᱟᱹᱛᱭᱟᱹᱣᱟᱱᱴᱚᱴᱷᱟᱹᱠᱤᱭᱟᱹ ᱟᱨ ᱢᱮᱴᱨᱤᱠᱥ ᱫᱚ ᱢᱟᱨᱟᱝ ᱟᱨ × ᱑᱐ ᱢᱤᱢᱤᱴᱚᱨ ᱨᱮ ᱧᱟᱢᱚᱜ ᱠᱟᱱᱟ ᱾
ᱡᱮᱜᱮᱛᱟᱹᱨᱤ
The injection structure adopts three grades injection system with two grades injection speed and one grade pressurizing, which meets requirement of die-casting technology. You can adjust start time of the quick injection to preset slow stroke distance.
ᱦᱟᱭᱰᱨᱚᱠᱥᱤᱞ ᱥᱤᱥᱴᱚᱢ ᱨᱮ ᱵᱟᱹᱲᱛᱤ
It provides moving forces for machine and receives the command from the electrical and electronic control system. It also provides hydraulic power to actuators of the machine. The units includes a hydraulic pump, hydraulic valve and actuators. All hydraulic direction control valves and pressure valves in machine are national standard valves, for convenient replacement.

ᱤᱞᱮᱠᱴᱨᱚᱱᱤᱠ ᱥᱤᱥᱴᱚᱢ ᱟᱨ ᱤᱞᱮᱠᱴᱨᱚᱱᱤᱠ ᱠᱚᱱᱴᱨᱚᱞ
ᱤᱞᱮᱠᱴᱨᱚᱱᱤᱠ ᱥᱤᱥᱴᱚᱢ ᱟᱨ ᱵᱤᱡᱽᱞᱤ ᱥᱤᱥᱴᱚᱢ ᱫᱚ ᱢᱤᱫ ᱭᱩᱱᱤᱴ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱐.᱕ ᱤᱱᱪ ᱠᱚᱱᱴᱨᱚᱞ ᱥᱤᱥᱴᱚᱢ ᱠᱟᱱᱟ ᱾

The YSC38 38T cold chamber die casting machine electric controlling system is designed and manufactured especially for the die-casting machine. This system consists of electric controlling part, programmable controller (PC), working-state monitor, property setting and other parts. It not only has stable performance, precise action and flexible parameter setting, but also has the monitor to demonstrate the working state of the machine, which is easy for operating and ᱱᱟᱶᱟ {}} } }
ᱤᱣᱱᱤᱴ
Q: ᱪᱮᱫ ᱟᱢ ᱢᱤᱫ ᱢᱚᱰᱮᱞ ᱮᱢ ᱧᱟᱢ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱟᱨ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱟᱨ ᱮᱴᱟᱜ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱠᱮᱴᱮᱡ ᱛᱮ ᱠᱚ ᱵᱮᱵᱷᱟᱨ ᱮᱫᱟ? ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱥᱚᱨᱮᱥ ᱟᱨ ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱵᱮᱥ ᱫᱚ ᱪᱮᱫ ᱠᱟᱱᱟ?
A:ᱡᱟᱦᱟᱸ ᱞᱮᱠᱟ ᱛᱮ 25MMM ᱫᱚ 25MM ᱟᱨ 2005, 2, 285, impoption, ᱟᱨ extion jạruṛa jạruṛaṭaṛha kạmi lạgit̕ jạruṛa kạmi lạgit̕ jạruṛ gạḍi jạruṛ gạḍi jạruṛ gạḍi jạruṛ gạḍi ko jạruṛ gạḍi jạruṛ gạḍi ko jạruṛ gạḍi ke kạmi lạgit̕ jạruṛ gạkhuṛ gạkhuṛ gạkhum ᱠᱟᱱᱟ᱾
Q: ᱟᱢᱟᱜ ᱫᱟᱲᱮ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱢᱩᱲᱩᱫ ᱫᱟᱹᱭᱠᱟᱹ ᱪᱮᱫ ᱠᱟᱱᱟ?
A: ᱢᱟᱨᱟᱝ ᱜᱚᱲᱦᱚᱱ ᱫᱚ ᱢᱤᱫ ᱢᱟᱨᱟᱝ ᱜᱚᱲᱦᱚᱱ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱨᱮ ________________________, ᱢᱤᱫ ᱡᱮᱞᱮᱝ ᱟᱨ ᱡᱮᱞᱮᱝ ᱢᱚᱰᱮᱞ ᱢᱮᱱᱟᱜᱼᱟ ᱾
Q: ᱪᱮᱫ ᱞᱮᱠᱟ ᱛᱮ ᱢᱟᱥᱤᱱ ᱠᱚ ᱛᱤᱱᱟᱹᱜ ᱜᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱮᱢᱚᱜ ᱠᱟᱱᱟ?
A: ᱜᱞᱩᱠᱚᱡᱽ ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ (ᱪᱤᱛᱟᱹᱨ ᱔.᱕) ᱨᱮᱭᱟᱜ ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱡᱤᱱᱤᱥ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱑ ᱢᱤᱢᱤᱢ ᱠᱟᱱᱟ ᱾
Q: ᱟᱢᱟᱜ ᱥᱮᱨᱢᱟ ᱨᱮᱭᱟᱜ ᱠᱟᱹᱢᱤᱦᱚᱨᱟ ᱪᱮᱫ ᱠᱟᱱᱟ?
A: ᱨᱤᱢᱚᱴ ᱫᱚ } } } } } __________᱾
ᱦᱚᱜᱽᱥ: 2000 ᱥᱟᱞᱦᱟ ᱨᱮ ᱡᱟᱯᱟᱱᱤ ᱠᱚ ᱫᱚ 2000 ᱥᱟᱞᱦᱟ ᱨᱮ ᱠᱚ ᱠᱟᱹᱢᱤ ᱠᱮᱫᱟ, ᱱᱚᱶᱟ ᱠᱚ ᱢᱩᱫᱽ ᱨᱮ ᱵᱟᱨᱥᱮᱞᱚᱱᱟ ᱠᱚ ᱫᱚ ᱟᱠᱚᱣᱟᱜ ᱠᱟᱹᱴᱤᱡ ᱠᱚᱱᱟ ᱨᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱ ᱠᱚᱱᱟ ᱠᱚ ᱵᱮᱱᱟᱣ ᱠᱮᱫᱟ᱾











